Product data sheet |  |
(Flügger Natural Wood Lakbejdse)
Product properties
Black lacquer stain for a combined dyeing and lacking of wood. Provides a very robust and wear-resistant surface.
Comes in semi-glossy and matt.
Application
For interior application on, e.g., tabletops, furniture and other inventory of wood. Not suitable for lacquered surfaces, neither for floors.
Treatment
The substrate must be clean, dry and solid, free from residues of old oil, paint or lacquer. Clean, if necessary, with Flügger Natural Wood Cleaner.
If need of sanding - wipe off slip. Stir before and during use.
Apply 2 layers of lacquer stain with a 24 hour interval. Sand slightly between each application. Grain size 120-180.
Apply by paint brush or lacquer roller.
Apply lengthwise in a uniform layer thickness. Avoid overlapping - this may cause blotches.
Cleaning and maintenance
Clean lacquered surfaces with Fluren 32 Universal Cleaner. Retreat with Flügger Natural Wood Lacquer Stain before the lacquer layer is worn through.
Before retreatment, wash with Flügger Natural Wood Cleaner. Sand slightly.
Good practice
In order to obtain a good result, it is important that the surface is completely dusted off before application.
Please also refer to the information on the label as well as to the application guide on Link="www.flugger.com"
Type: Lacquer stain containing solvents Gloss: Semi-glossy: 50, Matt: 10 Specific gravity: 0.9 kg/litre Solids: Weight %: 45-50 Application: Minimum working temperature during application and drying/curing: +15 °C Maximum atmospheric humidity 80 % RH Spreading rate: 8-10 m2 per litre per treatment Druing time at 20 °C, 60 % RH: Dry to touch: 12 hours Recoat interval: 24 hours Fully cured: Several days Dilution: Not to be diluted Cleaning of tools etc.: White spirit Storage: Cool and tightly sealed
Key: LAKBEJDSE December 2010, replaces April 2010